BFT225D

The 225 hp powerful four stroke, the BFT225D, brings a large displacement 3.6 liter V6. This narrow V6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.

The new BFT225D provides a broader torque range and smoother power throughout the engine’s operating range. With an innovated exterior, the improvement of corrosion resistance and water intrusion makes BFT225D the right choice.

Tohatsu 225 hp 4-Stroke Benefits

High output alternator that produces 90 amp alternator with 60 charging amps
Large Displacement 3.6 Litre V6
Available in 25" shaft lengths. Standard and Counter rotation
Double sealed multi-layered paint process to help protect against corrosion
Semi direct air intake system
Enhanced sealing system by adopting three new large locks

Tohatsu 225 hp 4-Stroke Benefits

High output alternator that produces 90 amp alternator with 60 charging amps
Large Displacement 3.6 Litre V6
Available in 25" shaft lengths. Standard and Counter rotation
Double sealed multi-layered paint process to help protect against corrosion
Semi direct air intake system
Enhanced sealing system by adopting three new large locks

4-Stroke Technology

Lean burn control for better fuel economy at cruising speeds
Maximum Acceleration System helps to deliver an exceptional hole shot
Variable valve timing and lift control
3-Way Cooling System to help protect against overheating
Heavy duty 5" diameter gear case built to withstand extreme conditions
Non-linear rubber mounts provide smoother operation at all engine speeds
A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
Optimized Fuel Injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

Through the prop exhaust for a quieter ride
Built-in freshwater flushing system for easy routine flushing
Separate dual air intake cowling design to help keep your engine's critical components cool
Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

Low oil pressure warning
Overheat warning
Low battery voltage warning
Water in fuel warning
Start-in-gear protection
Over-rev. limiter

Specifications

Engine (No. of Cylinder)	6 Cylinder SOHC, 60 degrees V6, 24 Valve
Output	225 ps (165.5 kw)
Displacement	3,583 cc (218.6 cu.in.)
Bore x Stroke	89 x 96 mm (3.5 x 3.8 in)
Starting	Electric
Control Type	Remote Control
Gear Shift	Forward - Neutral - Reverse
Gear Ratio	2.0:1 (12:24)
Ignition System	MicroComputer Programmed
Propeller Selection Range	15" - 27"
Transom Height	20", 25"
Fuel	Unleaded Gasoline (87 Octane) or higher
Oil Type	NMMA Certified FC-W^® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity	7.8L (2.1 US Gal.) w/filter
Weight*	286 kg (631 lbs.)
Alternator Output	12V, 1080W, 90A
Max. RPM Range	5,000 - 6,000
Programmed Fuel Injection	Standard
Start In Gear Protection	Standard
Thermostat Controlled Cooling System	Standard
Through-The-Prop Exhaust	Standard
Overheat Buzzer	Standard
Power Trim and Tilt	Standard
Oil Pressure Warning	Standard
Variable Valve Timing & Lift Control	Standard